DIY: Magnetic Knife Strip with No Visible Holes (How to)

0

We have recently moved places and, as much as I love my new home, I miss my huge kitchen. Our kitchen was indeed huge before, and while the new one is nice and everything, it is very compact with much less counter, cabinet, and drawer space. I try to keep things squirreled away to make the space cleaner, meaning our knives were kept in a knife organizer in one of the drawers. I am keen on our knives being in the best shape possible, and having seen what those knife blocks that stay on your counter can do to the tip of your knives, I’ve kept away from them.

I was happy with the knife organizer in the drawer, but we have six drawers in our new kitchen, four of those being about eight inches wide and too thin to hold the organizer, and the other two being quite deep to hold our pots and pans. So I had to think about something, and it quickly came to me: I had to get a magnetic knife strip in order to save space. And in this article, I will share with you a how to guide for the DIY Magnetic Knife Strip with no holes – Ikea type!

We decided on settling on the Grundtal from Ikea. I had seen some hacks of it online, from people using glue to stick it on the wall to people gluing two together back to back to hold their knives against the side of the refrigerator. So there were options!

However, it seems that Ikea had changed the look of the Grundtal since everyone who’s done a hack on it had posted their pictures on the internet. Thus I had no idea how I was going to hack it now, but I decided to give it a shot. It was only $13 and I had no better alternative. I took it home, played with it, hurt some fingers (they put a LOT of strong magnets, so be careful, it is not something for little kids to play with as I felt that I was playing with death).

After making some trips to Home Depot and Michael’s, I settled on filling the back cavity with wood. I wanted the back side to be flat so that I could use the 3M Contact strips to adhere the knife rack to the wall. I’ve used 3M Contact strips for other things around the house and I concluded sticking a bunch of 3M Contact strips to the back of my modified knife strip would be sufficient.

WARNING: This probably will not seem safe to some people. I’ve thought up different ways to go about achieving the desired results (magnetic knife rack, mounted on wall, without drilling or permanent damage), but I didn’t have much space and this seemed the best way to achieve those results. That said, if I had kids, I would not have used this method, I probably would’ve gotten a knife block. However, I think my risks were calculated, and I’ll go into it more below. In our case, it’s been several months and no problems… but proceed at your own risk.

Materials required for the Ikea DIY Magnetic Knife Strip with no holes

Grundtal Magnetic Knife Strip
– 3M Command Mounting Strips – 2 large and 2 medium
E-6000 Glue or any other glue that will bond to metal and to wood
– Wood pieces – I got wood pieces from Michael’s, brand ArtMinds. Each piece measured .1in x 1.1 in x 11 in.
– Optional – Gloss Spray Paint

Instructions

The Grundtal Knife Rack comes with two long metal pieces and two small circular pieces. One of long metal pieces (piece #1) is the outside which the knives will touch. The other long metal piece (piece #2) is used to mount to the wall. Ignore the small circular pieces and carefully put the wall mount piece, piece #2, in piece #1, with the bump facing outside. Piece #1 is lined with strong magnets, so they will snap together quickly. Don’t get your fingers stuck in between because it will hurt – I have first hand experience with that!

Before I glued the wood pieces in, I spray painted them with clear gloss. I used clear pine craft wood and the surface was a bit rough and soft. I decided to give it a harder surface with the clear gloss, but you could use also use lacquer.

Cut the wood strips so that it will fit. The craft wood was soft enough that I just used an exacto knife to cut it to fit. The wood sat flush with the top of the metal piece. The wood should sit flush or extend beyond the top of the metal piece, else you will have problems getting it on the wall.

Put E-6000 all over the inside. Press the wood into metal piece and let dry.

When it dried a bit, but was still soft, I turned it over and let it dry upside down on some papers. This was to ensure the wood was flush with the top.

After the glue has dried, stick the 3M strips according to the instructions on the package. Of course I forgot to take a photo of this part, but I’ve marked up the photo below to show you how I stuck them on. I put the large pieces on the ends and medium pieces in the middle. Tabs should stick out so you can remove the knife strip later. The large strips have a weight limit of 5 pounds and the medium strips have a weight limit of 3 pounds. Doing the math, that’s 16 pounds minutes the weight of the strip itself that it should be able to hold. I’ve used the 3M hooks in the past with great success, so I went for it.

The result:

As I’ve said earlier, it’s been up for several months now and I haven’t had any problems with it, just a clean counter!

LEAVE A REPLY